How To Turn Your LomoKino Scans Into A Movie The Lomography Way

13

So how did we scan and create all those movies you’ve already seen, you wonder? Mandi, who works in our archive and tests all our cameras, wrote a little program for himself to speed up the process. We wanted to share this with you, explain how it works, and ask you to improve on it or port it to other platforms.

This little program should help you to save time and nerves when trying to create a movie from your LomoKino scans. Although it works reasonably well, it is exactly what it is: a proof of concept and time-saver.

How can I create a movie the easy way?

What it’s not:

  • programmed by a programmer – the goal was to get the job done and make a tool that can be used internally
  • a software with hundreds of options and a GUI
  • running on a variety of operating systems
  • able to detect every little hint of slightly exposed movie frame
  • working on Mac/Linux (yet!)

What it can do:

  • able to detect frames as long as they are properly exposed
  • able to cope with overlapping frames
  • deal with sprocket holes and even exposing sprocket-hole movies
  • run on Windows
  • be a pretty awesome little tool

How to install it:

  • Download and install a version of ImageMagick
  • Restart your computer (we had trouble before doing so, just to be safe)
  • Download our program and save it to your hard disk.

Remember: this program is “as is” and definitely not fully tested on different PC configurations. Please do not contact us if you cannot get it to work properly or something goes wrong. Feel free to post questions and feedback in the comments below.

How to use it:

Simply drag and drop the folder with your LomoKino scans onto the autokino program and follow the instructions. After you are done, you will find the movie in the scans folder as well as a subfolder with the single movie frames which you can use for further editing or whatever.

Requirement for scans:

Very important: The image should have good contrast, especially the black between the single frames should be really dark and not contain any noise. There should be no border whatsoever as it influences the image-detection.

This is a great example

The frame detection and order of the movie-frames is from left to right! Do not try to use top to bottom scans, it simply won’t work. If you want to include sprocket holes in your movies, make sure to prepare the scans in approximately the same way as shown in the example. (If you export non sprocket movie from a scan with sprocket holes, it will simply be cropped to 70% of the scan. Maybe semi-automatic detection will be added in a future version.)

If you scan at home with your flatbed scanner, make sure you only scan strips with full frames. Other options are scans from your lab.

  • If you get automatic scans, looking similar to a supersampler image, the program might leave out some frames as they might be cut off and the single movie frame would simply be too small.
  • The better version, though more elaborative and therefore expensive, is to get manual scans that are longer and might include a cut off frame at beginning or end. You should have no problems ordering this at a Lomolab, but if you’re asking your local lab, explain that you need all frames from the negative and they have to fully include the frame they just partly scanned before. Tell them also that the order and orientation of the scans should stay the same as required (first frame is on the far left).

Are you interested in writing a program for Mac or Linux? Then please read this article as well!

mandi tarafından, 2011-11-11 tarihinde ve #donanım #dersler #tipster #software #lomokino başlığında yazıldı.

13 Yorum

  1. mandi
    mandi ·

    if anyone should try this out: please leave a short comment if it works on your machine :)

  2. derkoerner
    derkoerner ·

    No Mac support??? Oh, you're kidding…

  3. stouf
    stouf ·

    Hooo mandi... That looks very good ! If only I had a lomokino... : )

  4. photochrom
    photochrom ·

    I've tried this with my Supersampler scans and the program is not working.

  5. hughh
    hughh ·

    Hey mandi, I have been trying this with the sample scans as well as my own images but have had no luck. I get an error that says:
    "'identify' is not recognised as an internal or external command, operable program or batch file."
    It simply creates an empty frames folder. I am running Windows 7

    It's great to get the ball rolling so there is an easy way to create these movies. Hopefully we can get this thing going for everyone soon.
    Cheers!

  6. gvelasco
    gvelasco ·

    I'll be looking into this. There's a program called 8mm2avi that does this for scanned 8mm movies. Maybe it can be modified.

  7. stouf
    stouf ·

    It works beautifully.

  8. stouf
  9. hughh
    hughh ·

    Just reinstalled the program following the instructions word for word and it works a treat. I made my first movie manually (cropping frame by frame) so I can appreciate the time and hairloss saved by this little program. It feels like I'm cheating the system somehow!

    I like the witty touches in the prompts, and the cmd format makes me feel like a hacker, so that's a bonus. Thanks!

  10. pink-fu
    pink-fu ·

    @hughh FYI bitbucket.org/mgron/kinocut/ does approximately the same but with a user interface

  11. snailish
    snailish ·

    it works beastly, thank you :D

  12. mmxi
    mmxi ·

    @PINK-FU wow, who developed this? They've made an update for kinocut, which is called samplom.at and it is just great!

  13. essgeephoto
    essgeephoto ·

    It does work on my machine - Windows 10. Some things I discovered (may just be my problems) . . . the scanned output has to be JPG or converted to JPG in order for AutoKino to recognize. In your scanning program, turn thumbnails off which will allow you to scan the entire negative strip. When you are scanning (my scanner is an Epson V500), take advantage of Digital ICE to remove dust spots and scratches - do not use Unsharp Mask to sharpen - it will sharpen the dust spots. Also use the scanner editing program to adjust levels, contrast, saturation on the whole strip. Move the JPG files to C:\Users\YourName\Videos\lomokino-program.

Daha İlginç Makaleler